Starting a little late – so have a Pokeball Santa hat pattern!

Starting my holiday crafting a bit late; life is getting better, but it’s also BUSY. Suddenly I’m getting Jayne hat orders again after a break of a few years. Why? Who knows, lol. (this post has actually been in “Drafts” for a week & a half, lol. SO BUSY!)

I saw someone in a fiber arts group make a Santa Hat with a couple of appliques that make it look like a Pokeball. Pretty much all the comments were “I AM SO STEALING THAT IDEA!!!” Especially since I already know that the Lion Brand crocheted Santa hat pattern has a “crocheted pompom” – basically a ball. Score!

Unfortunately, and like always, there wasn’t one pattern that I liked. The Lion Brand hat is all single crochet, and the Red Heart pattern is double crochet; my favorite stitch for hats is half-double crochet. It’s more dense than dc, but works up faster than sc. It just looks the best, too, in my opinion.

And then there’s the ribbing. All the crocheted hat patterns either had no ribbing, or you made a separate white back/front loop only crochet strip, and then pick up stitches in red, working the hat from the bottom up. Oh heck no, I want a pattern that I can just stop when it’s the right size for the recipient’s head, and then start the awesome front/back post crochet ribbing that we’ve been doing for years.

Well, OK, I’ve made up far more difficult patterns, right? Well, it was super easy to figure out!

Gotta deliver ’em all!

Tips:

~ I do the Pokeball pompom first, and then attach it after I’ve done a few rows of the hat. It’s really skinny in there, and it’s much easier that way.

~ For a regular Santa hat, don’t switch to black yarn, and work that row in red. You don’t need to make the circles to sew on. That’s it, everything else is the same!

~ You can change it up a bit; the one in the example uses sparkly yarn for the white. You can use fuzzy/eyelash yarn for the white, and if you’re not making a Pokeball, you can make a regular pompom to tie on.

~ This one is sized the same as my regular adult Jayne hat; my son’s head is about 22″, which I’ve discovered from my years of selling hats is the size that most people get. If you’re making a hat for a baby or smaller person, just stop when the increase makes it the right size, then work three rows even in red before switching to black or white. To make it bigger, just keep adding 1 hdc to the increase rows, and continue the inc row/ 2 even rows pattern until the opening is as wide as you need it to be. If you make one to go over ‘locs, I want a picture!

 

Pokeball Santa Hat

Gauge isn’t critical, you start at the tip top of the hat and work until it’s the size that you want. I used Caron Simply Soft yarn, and a size G (5mm) hook. Use whatever your favorite combination is.

sl st = slip stitch
sc
= single crochet
hdc = half double crochet
inc = increase, work two stitches into one stitch
dc = double crochet
dec = decrease, insert hook into stitch, pull up a loop, insert hook into next stitch, pull up a loop, yarn over, pull yarn through all hoop on the hook (one stitch made over two stitches of the previous row)
fpdc = front post double crochet
bpdc = back post double crochet
FO = fasten off
(I used to provide links to tutorials for stitches, but blogs and YouTube channels come & go. I know you guys know how to do a google search! I specify how I inc & dc, because there are different ways that people do it that can give a different look.)

I crocheted the example in a spiral, and hid the color changes behind the circle applique. If you don’t want to do that, at the end of each row, join with a slip stitch to the first st of the previous row, chain 2, then work the first stitch into the SAME stitch as the join.

 

1. Work 5 sc in magic/adjustable circle (5 sc)

2 – 3. One hdc in each st. (5 hdc)

4. Inc (2 hdc in same st) in each st around (10 hdc)

5 – 6. Work even 2 rows

7.  Work *hdc, inc* around (15 hdc) (Hdc in next st, inc in the next st, repeat 5x)

8 – 9. Work even  for 2 rows (15 hdc)

10. *2 hdc, inc* around (20 hdc)

11 – 12. Work even 2 rows

13. *3 hdc, inc* around (25 hdc)

14 – 15. Work even 2 rows

16. *4 hdc, inc* around (30 hdc)

17 – 18. Work even 2 rows

19. *5 hdc, in* around (35 hdc)

20 – 21. Work even 2 rows

22. *6 hdc, inc* around (40 hdc)

23 – 24. Work even 2 rows

25. *7 hdc, inc* around (45 hdc)

26 – 27. Work even 2 rows

28. *8 hdc, inc* around (50 hdc)

29 – 30. Work even 2 rows

25. *9 hdc, inc* around (55 hdc)

26 – 27. Work even 2 rows

28. *10 hdc, inc* around (60 hdc)

29 – 30. Work even 2 rows

31. *11 hdc, inc* around (65 hdc)

32 – 33. Work even 2 rows

34. *12 hdc, inc* around (70 hdc)

35 – 36. Work even 2 rows

37. *13 hdc, inc* around (75 hdc)

38 – 39. Work even 2 rows

40. *14 hdc, inc* around (80 hdc)

41 – 43. Work even 3 rows

Change to black
44. Work one row hdc even (80 hdc)

Change to white
45. Work 1 row hdc (80 hdc)

46. 1st row of Ribbing: work one fpdc in next st, one bpdc in next, repeat (80 dc)

47 – 50. Repeat row 46. Work fpdc into the previous row’s fpdc; same for bpdc.

Fasten off

You can work more or less rows of ribbing, depending on the size, and what looks good to you. If you’re using a fuzzy/eyelash yarn, you can just work plain hdc.

Circle applique for Pokeball hat

1 Sc 5 into magic/adjustable circle. Join w/sl st into the first sc, ch 1. When you start the next row, work the first stitch into the SAME st as the join.
2. Inc in ea st (10 sc) Join w/sl st into the first sc, ch 1
3. *sc, inc* around (15 sc) Join, ch 1
4. *2 sc, inc* around (20 sc)  Join, ch 1. Switch to black
5. *3 sc, inc* around (25 sc) Join. Sl st in next sc, FO

Place circle onto hat centered on the black row, whip stitch around the edge to sew in place.

Tie pompom onto hat (if you haven’t already), weave in ends.

 

Pokeball

Small and Medium Sizes Only
Start in Red.

1: Work 6 sc in circle. Leave a long enough tail to tie to hat.
2: Inc in each st around (12 sc)
3: *1 sc in next st, inc* around (18 sc)
4: *2 sc in next st, inc* around (24 sc) Switch to black
5:  Sc in each st around (24 sc)
6: *Sc in each of next 2 sts, dec* around (18 sc)
Begin to stuff piece. Continue to stuff as work progresses.
7: *Sc in each of next st, dec* around (18 sc)
8: Dec around (6 sc) FO leaving a long tail. Thread tail through rem sts and pull to gather.

Large Size Only

1: Work 6 sc in circle. Leave a long enough tail to tie to hat.
2: Inc in each st around (12 sc)
3: *1 sc in next sc, inc* around (18 sc)
4: *2 sc, inc* around (24 sc)
5: *3 sc, inc* around (30 sc)
6: *4 sc, inc* around (36 sc)
7-8: Sc in each st around. For Pokeball, work row 8 in Black, then change to white.
9: *4 sc, dec* (30 sc)
10: *3 sc, dec* (24 sc)
Begin to stuff piece. Continue to stuff as work progresses.
11: *2 sc, dec (18 sc)
12: *1 sc, dec (12 sc)
13: Dec around (6 sc)
Fasten off, leaving a long tail. Thread tail through rem sts and pull to gather.

Circle for front of Pokeball

1. Using white, sc 6 into a magic circle. Join with a sl st to first sc, ch 1
2. Switch to black, inc 6x (12 sts) Join. Sl st in next sc, FO, leaving a tail long enough to sew on to Pokeball.

Place circle onto ball centered on the black row, whip stitch around the edge to sew in place.